Patios Uncategorized

The Best Way To Clean a Concrete Patio & Common Questions Answered

Cleaning a concrete patio is hard work. It can be time-consuming and tedious, but it doesn’t have to be. With just a few simple steps, you can turn that dirty surface into something beautiful in just an hour or two, depending on the size of your patio!

That’s right; cleaning your concrete patio doesn’t need to be a daunting task, especially on a hot day in Melbourne, FL. Follow these tips and you’ll be done in no time at all!

Steps to clean a concrete patio without a pressure washer

Cleaning a concrete patio can be tricky business if not done properly from start to finish. If you don’t have a pressure washer, you can still get a fantastic result with a bucket and a scrub brush.

The best way to clean a concrete patio: sweep, spray, scrub, then seal.

  1. The first step is sweeping the surface of the patio with a broom and shaking out any loose debris or dirt before applying any cleaner. Once the patio is clean, apply an all-purpose cleaner and scrub it into the surface before spraying it off with water.

    Sweep the surface of the patio first using a broom and shaking out any loose debris or dirt away.
  2. Next, apply an all-purpose cleaner directly onto the surface of the patio and scrub it into the cement using a damp mop (or brush). The best all-purpose cleaners for concrete are the acid-based kind, as they remove several types of stains.

    However, you should dilute the cleaner with water before applying it so that it is not too strong and will not corrode your patio in the process. You should then scrub the surface thoroughly using a mop or brush before spraying it off with water.

    An all-purpose concrete cleaner that contains phosphoric acid can be found at most home improvement stores and hardware shops for approximately $10 per gallon. Dilution rates vary by type but typically you should only use 1 part cleaner to 4 parts water prior to application on your patio. Remember – do NOT pour undiluted product directly onto cement!

    You may find that some concrete stains simply will not come off with this method unless the concrete is nearly brand new. In that case, apply a concrete sealer to help prevent future staining.
  3. Then spray off that cleaner with water from either your hose or a special patio cleaner.
  4. Finally, apply some patio sealer so that your work doesn’t go to waste! The best concrete sealers are the kind that are oil-based or contain a resin and concrete dye to make the concrete look great.

    You can buy concrete sealer at home improvement stores for less than $30 per gallon. Be aware that concrete sealers have limited shelf lives of 1-3 years, so be sure to store it in an area where it is not exposed to direct sunlight or high temperatures (such as in your garage).

    Apply the concrete sealer by pouring it onto the rough surface of your concrete patio and spreading it with a broom or push broom. Once fully dry, you’ll be able to enjoy your freshly cleaned patio!

What is concrete, and what are its benefits?

Concrete is a man-made material that can be used to form structures such as concrete slabs, concrete blocks, concrete patios, or driveways, etc. Concrete is one of the most widely used construction materials in today’s society. One of the major benefits of concrete is that it lasts extremely long and is durable. The concrete doesn’t need much maintenance either!

Why you should seal your patio after cleaning it with an all-purpose cleaner

The benefits of sealing your concrete patio after cleaning it are many. A concrete patio will look clean and ready to use again in no time at all. You can choose from a range of concrete sealers that will be suitable for your concrete surface.

What benefits does concrete sealing offer?

  • Extra protection against stains, making it easier to maintain in the future
  • Improved appearance due to a smooth satin finish which highlights the natural beauty of concrete
  • Power-washability with most products offering a power wash resistant finish

Tips for the best results when cleaning a concrete patio

Concrete is used a lot these days for the outside of houses because it looks good & lasts a long time. Over time, concrete becomes stained from mildew and mold which makes it look bad. This article has some great tips to help you clean your concrete patio so that it will look as good as new!

Tip 1: Research concrete patio cleaners to find the right one for your concrete.

Tip 2: Always sweep a concrete patio before washing and then again after you’re done.

Tip 3: Use a concrete sealer to protect the concrete after cleaning.

Tip 4: Use concrete cleaners that are pH neutral or slightly alkaline.

Tip 5: Clean concrete patios often to remove dirt, mildew, and mold.

Tip 6: Follow all manufacturer’s instructions when using concrete cleaners and sealers on your concrete patio.

Concrete Patio Cleaning
Concrete Patio Cleaning

How long does it take to clean a small-sized concrete area (e.g., 12′ x 12′) by hand?

There are a couple of tips to help you clean concrete faster. If you sweep the concrete first, you will get it more or less clean without having to scrub it too hard. You will also want to use a concrete cleaner that is pH neutral or slightly alkaline and that is very effective on concrete. A concrete sealer will also keep your concrete clean for much longer than just trying to wash it off with soap and water.

It should take about 25 minutes to scrub a 12′ x 12′ concrete patio by hand with some good concrete cleaners and brushes.

Common questions about cleaning your concrete patio answered:

What’s the best thing to clean concrete with?

White vinegar is a great cleaning solution because it’s natural, cheap and most effective for concrete.

The best way to remove tough stains is with a white vinegar soak. Simply pour the acid directly onto the stain, let it penetrate for 20 minutes or so, then scrub away using a stiff-bristled brush. If you have a concrete surface covered in rust stains, scrubbing with the right brush can be an eco-friendly way to remove them.

Can you use bleach to clean concrete?

Bleach is a versatile cleaner that can be used on most surfaces, including concrete. To use bleach safely, it’s important to work in well-ventilated areas and dilute the mixture with water if you need to avoid overwhelming fumes of chlorine gas. People who are especially sensitive or have respiratory issues should consider wearing protective gear when using strong chemical cleaners like bleach because they could cause irritation or other symptoms such as coughing, wheezing and difficulty breathing for those people specifically.

Does baking soda clean concrete?

Baking soda is a common household ingredient that can be used to clean concrete. It can also be used to whiten laundry, disinfect surfaces and remove unpleasant odors. To clean concrete stains or spills from concrete, sprinkle baking soda on the surface and then scrub with a brush. Rinse thoroughly before applying another coat of concrete sealant.

Can Simple Green clean concrete?

It is indeed possible to use Simple Green to clean concrete. Cleaning and maintaining your patio is a regular task for any homeowner. Simple Green Concrete & Driveway Cleaner uses special cleaning agents to remove dirt, oil, grease or grime from concrete surfaces around the house without corrosion of degradation over time.

It also removes tough stains that are not caused by dyes which makes it easy on you because there’s no need to scrub away at stubborn anything!

The concrete surface will have to be rinsed off before the concrete sealant is applied. In addition, it is important that you work with the concrete in a well-ventilated area as chlorine gas can become overwhelming and could cause irritation for people who are especially sensitive or those with respiratory issues.

Does Dawn clean concrete?

Although concrete is very durable, it does eventually develop stains from everyday wear and tear. Dish soap, the dishwashing staple that cuts grease in your sink and counters also comes in handy for cleaning up oily spots on concrete patios. Just add the dish soap to a bucket and fill it with water, and then use your household mop to apply the solution. For stubborn oil stains, you can use a scrub brush as well.

How do I keep my patio from turning green?

Green algae, a microscopic, plant-like organism, will grow on your concrete patio when it is constantly damp. Many homes in humid climates are constantly fighting off the growth of fungus and algae, but if left untreated, they can permanently discolor their surface areas.

Fortunately, Wet & Forget helps with green algae on patios, driveways, and walkways. Just apply a thin layer every 12 months when needed.


We hope you’ve found the information in this blog post helpful. Please feel free to give us a call at (321) 732-6123 and we can answer any questions or provide further advice on cleaning your concrete patio. And if you have an upcoming project that needs professional attention, Manatee Concrete in Melbourne, FL is here for all of your paving and sealing needs! Call today to get a quote – it’s always FREE!


Why Concrete Cracks: Different Types and What They Mean

Ever notice concrete cracks in your driveway or patio? Chances are, you have. Concrete is a very durable material that is used for driveways and patios, as well as walkways and other structures. But concrete cracks due to several different factors such as poor soil prep, poor concrete mixtures, and curing issues.

In this blog post, we will discuss concrete cracks: what they mean and how to plan the project in Melbourne, FL.

What is concrete, and what are the ingredients that make up a typical mix?

Concrete is made up of cement, water and aggregate. Aggregate is concrete’s main ingredient: sand, gravel or crushed stone that acts as the glue for concrete to hold together when mixed with cement and water.

The ingredients in concrete may vary depending on what type of concrete it is (e.g. Portland cement concrete) but there are other additives you might see such as fly ash or slag which replaces some of the more environmentally damaging fillers found in traditional mixes like limestone and shale dusts

It may contain other ingredients such as fiberglass fibers, aluminum powder, polycarboxylate super plasticizer (PCA), flyash or slag cementing agent instead of Portland Cement – these additives help make concrete even stronger by adding extra strength to the material!

Why does concrete crack, and how can you tell if it’s about to split or break?

The reasons concrete cracks is a complicated process, but concrete has a lifespan and will eventually crack.

Here are some common reasons why concrete cracks:

  1. Too much water in the mix. If this happens, the concrete will fail to set properly and eventually crack.
  2. Exposure to freezing and thawing cycles (this is less of a concern in Melbourne)
  3. Age of concrete, specifically with concrete from the 20s or 30s is more likely to crack because it does not contain air bubbles.
  4. Inferior material – for example, sand that contains too much clay can cause concrete problems.
  5. The mix didn’t harden properly- this includes improperly mixed concrete where there are clumps in the mixture! This will allow water to penetrate into the cracks as they grow larger due to freeze-thaw cycles.  
  6. Horizontal movement: The ground underneath a concrete slab may shift over time resulting in cracking at right angles (slab edge). Vertical cracks form when stresses related to environmental factors like temperature changes or shrinkage result in small divisions.
Concrete Cracks
Concrete Cracks

How does soil prep factor into concrete cracking?

Poorly compacted soil can lead to concrete cracking. If the soil is not compacted enough, this can cause it to move and settle over time. The concrete will follow suit and crack as a result, which then leaves voids underneath that water seeps into.

Drought is also a leading cause of soil failure. A number of factors, such as dry soil or warm weather during periods of low rainfall, can cause your concrete to shrink and lose its structural integrity. The concrete eventually cracks and sinks into these empty areas when no weight is placed on it.

Flooding is another reason soil becomes unstable. Melbourne gets heavy rains in the summer, and when the rain occurs, it is easy for water to get under the slab because cracks are left over from dry periods when moisture cannot completely penetrate the concrete.

The wet, soft soil is unable to support the concrete above it. In the worst case scenario, the soil erodes and washes away completely, causing large voids in the ground which are not able to support any weight of concrete that is placed above them.

How do different types of cracks form in concrete – including hairline, shallow, deep, slab edge and vertical cracks?

Concrete crack can form due to the following reasons:

Hairline – these are very small, thin lines in concrete that usually appear as a result of shrinkage from freezing;

Shallow – this type of crack forms on concrete when it has been exposed to extreme temperatures or due to freeze/thaw cycles; they may also occur at joints where two pieces meet; if not repaired quickly enough, then deep cracking can soon follow.

Deep – these types form because concrete has dried out too much before being used (due to lack of proper curing) which causes deeper horizontal cracks and vertical ones near the surface eventually leading to breakage

Slab edges – these types of concrete cracks are usually caused due to insufficient support for the concrete slab and can lead to a very serious issue called spalling.

Vertical – is when loose pieces in concrete break off from the side.

As for premature drying, there are two common types of cracks associated with this..

Crazing cracks – These are Fine cracks that resemble spider webs or shattered glass are symptoms of a concrete slab losing moisture too quickly. While unsightly, these cracks do not pose a structural concern.

Crusting cracks – Crusting can happen during stamping, which involves adding texture or pattern to concrete surfaces. This often happens when the top of the slab dries first and becomes crusty on sunny or windy days.

It’s important that you know how to identify various types of concrete cracking issues, so you can contact professionals as soon as possible before they get worse!

What is acceptable concrete cracks?

A small crack in a tile of less than 1/8 inch width is typically the result of normal shrinkage and is not cause for concern. However, if the crack has increased in size or both pieces are elevated on opposite sides, then you should consult a structural specialist.

What can I use to fill concrete cracks?

If you want to save money, concrete cracks can be repaired with an epoxy-based sealant. However, when concrete cracks, it will usually start off small and then widen over time. The epoxy sealant can be used for regular concrete cracks but if the crack is deep or wide enough that you want to ensure a single repair has been achieved then you should have someone who knows what they are doing come out and patch the concrete before applying an epoxy sealant on top of the concrete patches.

If a crack is wider than 1/4 inch, it should be patched with a concrete patching compound. If the crack is narrower than or about 1/4 inch in width, it can be repaired using an adhesive type of product such as liquid filler or caulking. However, concrete patches are more durable and less likely to crack than caulking.

The best way to seal cracks in your concrete is with Quikrete Crack Seal. Just pour the latex repair liquid into the groove, where it dries to a natural color of stone or cement and lasts longer than any other product on the market! It’s perfect for horizontal and vertical applications as well.

Steps to prevent concrete cracks

If you’re having new concrete poured consider the following ways to prevent cracking:

  1. Start with a solid subgrade. If concrete is poured on top of an un-even subgrade, it will settle differently in different areas. A sound subgrade prevents this from happening and evens out the concrete surface.
  2. Modify the concrete mix. For example, concrete made with a high percentage of air produces concrete that has fewer cracks. Keep environmental conditions as constant as possible during construction and curing (i.e., maintain relative humidity levels).
  3. Install joints for concrete slabs. Joints provide a place where cracks can start and then progress to the edge of concrete rather than through it, preventing major damage from stresses that are not perpendicular to concrete surfaces.
  4. Properly cure the concrete after pouring. This is the last concrete-related point that should be considered, but it’s one of the most important factors in preventing concrete cracking.

Some concrete cracks are superficial and do not affect performance or safety; these can usually be repaired by grinding them off with a concrete saw to expose fresh concrete surface underneath

Other concrete cracking is a result of excessive drying or shrinkage. This is often seen in poorly-designed concrete structures, where the concrete did not receive an adequate amount of moisture before it hardened and shrank.


Concrete is a durable material that can last for decades. However, concrete cracks are common and happen due to many different factors, including freeze-thaw cycles or old age of the concrete itself. The good news is that concrete cracks don’t have to remain permanent fixtures on your driveway or patio; there are concrete crack repair options available! Consult with Manatee Concrete in Melbourne, FL about how we can help you fix any concrete cracking problems in an affordable way today. Give us a call at (321) 732-6123!

Uncategorized Driveways Patios Walkways

7 Important Questions to Ask Concrete Companies

Concrete companies provide homeowners in Melbourne, FL with a range of concrete services that are essential for the upkeep of their property. Concrete is an important material because it can be used to repair, replace, or create new concrete foundations like driveways, patios, and walkways. It’s also a material that can last for decades with the proper care and maintenance. These companies offer a wide variety of services from pouring new concrete to repairing old concrete, and everything in between.

Concrete also has a number of benefits that make it the perfect solution for any homeowner’s needs. For example, concrete dries quickly so you don’t have to wait long before using your driveway again. It also lasts longer than other types of materials such as asphalt, which can crack and break over time due to weather conditions such as winter snowstorms or summer heat waves.

To learn more about what these companies offer Melbourne, FL residents and the top 7 questions homeowners should ask their concrete contractor, continue reading!

Why concrete to begin with?

Concrete is a versatile material that can be used for anything from driveways to patios and sidewalks. Concrete is strong and can withstand harsh weather conditions, such as heavy rain or snow.

Concrete also dries quickly which means you don’t have to wait long before using your driveway or patio again, it lasts longer than other types of materials like asphalt which can crack and break over time due to different weather conditions like winter snowstorms or summer heat waves.

Concrete is a strong and durable material that can be used for both outdoor and indoor needs. Concrete also has the advantage of providing homeowners with an enormous variety of color options, which gives them the ability to match the concrete to their home or landscape.

Concrete companies will work with you to make sure your job goes smoothly and on time

Concrete contractors can help you determine the best type of concrete for your home. Concrete companies are also aware with the importance of working on time and meeting deadlines so that homeowners can get their jobs done in a timely manner. Concrete is dry within a few days, preventing homeowners from being inconvenienced by waiting multiple weeks or weeks after pouring or resurfacing their project.

Concrete companies also have the skill and expertise to make sure your job is done correctly and usually offer free estimates, so homeowners don’t need to worry about paying for anything until they decide on hiring them!

How do I choose a good concrete contractor?

When hiring a company to work on your concrete needs, it’s important to make sure that they have the skill and expertise needed to get the job done right. Concrete is not an easy material to work with, so homeowners should ask any questions they may have about the process and timeline.

Concrete companies are also aware of how weather conditions like winter snowstorms or summer heat waves can affect your project, so they will be able to manage this accordingly in order to get the job done on time.

Concrete companies typically offer free estimates before you decide on working with them, so homeowners don’t need to worry about paying upfront for anything! Concrete is a versatile material that can be used for both outdoor and indoor needs – from driveways to patios and sidewalks.

Concrete Companies and Contractors
Concrete Companies and Contractors

So now what should I ask concrete companies I interview?

1) How much experience do you have?

Even though reviews about local contractors on websites such as Angie’s List and Home Advisor can be helpful, it is important to interview any potential concrete contractor.

2) Do you have photos of past projects you’ve completed?

If you can’t find any photos of previous work, this is a great follow-up question. If your potential contractor hesitates to offer contact information for past clients, you might want to consider someone who has shared their previous work and expressed satisfaction with the results they’ve produced.

3) What is the earliest you can start my project?

If they’re in high-demand, chances are a concrete finishing company is juggling a few projects. Make sure your timeline aligns with their schedule to avoid delays.

4) Do you have a contract that you draft and sign, in writing, to ensure your work?

When there are problems following the project, such as quality or quantity of work done, it’s best to have an agreement written up with our client about expectations and responsibilities. A good concrete contractors will understand the importance of working on time and meeting deadlines.

5) Is it possible that I’ll need permits for my project?

A competent, experienced concrete contractor understands the permits and codes necessary for your construction project. Reputable concrete companies will usually know the contact information for local building and safety offices where you can get a permit and will often get one on your behalf.

6) Does my project require rebar reinforcement?

Rebar helps reinforce the concrete foundation, increasing its strength. Concrete contractors will know if this is required for your project and can provide you with an estimate of how much it might cost. Not all projects require rebar however, this is typically reserved for larger projects that require a large amount of concrete and weight. Concrete contractors will know if rebar is necessary for your project, but shouldn’t provide you with an estimate without knowing the specifics about what you’re looking to do.

7) Who will manage the project?

Concrete contractors should know how many people to expect when they come in, who will oversee them, and what the cleaning up process looks like. Be sure to ask if a supervisor will be present and how many workers they expect to work on the project.


Choosing concrete for your driveway, patio, or walkway is a valuable investment for homeowners. Concrete contractors have the knowledge and expertise to provide you with quality work that will last many years. They are also able to take on larger projects that require rebar reinforcement, which DIYers might not be aware of how much it would cost them in materials or labor costs.

Hiring a concrete contractor can save your time when they come up with solutions for problems affecting your project timeline as well. Concrete companies offer free estimates before starting any work so you don’t need to worry about paying upfront anything at all!

For these reasons, hiring a concrete company should always be an integral part of your home improvement plans no matter what kind of needs you may have- from driveways to patios and sidewalks.

Remember to look for concrete companies with a lot of experience, photos of past projects they’ve completed, can start on your timeline as soon as possible, and are available if you need permits or rebar reinforcement! Concrete companies offer homeowners valuable services and have the know-how to get the job done right.

Have a concrete project at your home or business? Call Manatee Concrete today at (321) 732-6123 for a free estimate or send us a message here!

Slabs Uncategorized

Concrete Slabs for Sheds: What You Need to Know

When you build a shed in Melbourne, FL, a concrete slab is an important step to consider. Concrete slabs provide a solid foundation for your shed and keep it from sinking into the ground or shifting around on uneven terrain. Slabs can also protect the shed from water damage and ground moisture.

When you build concrete slabs for sheds, it’s important that they are large enough to cover the area where your shed will be built so concrete doesn’t touch any grass or soil.

In this blog post, we will discuss concrete slabs for sheds and what you need to know before building one!

Concrete slabs are a great way to create a sturdy foundation for your shed

Concrete slabs keep your shed from sinking into the ground or shifting around on uneven terrain and provide a solid foundation for your shed and protect it from water damage while minimizing mold growth.

Concrete is also an effective insulation material, which will help keep the shed cooler in the summer and warmer in the winter.

Concrete slabs for sheds should be large enough to cover your entire area where you are building so concrete doesn’t touch any grass or soil.

Concrete Slabs For Sheds
Concrete Slabs for Sheds

What are common negatives for using a concrete slab for a shed?

It’s difficult to remove it you intend to remodel or landscape your yard down the road.

Breaking up a two to three-inch thick concrete slab with hand tools takes some time. You may have to pay for more expensive excavation machinery if you want it to be removed further down the line.

Building a shed on concrete footing is the most expensive because they require more material.

To estimate the cost of concrete for a slab and determine the necessary concrete volume for a foundation, you will need to know the measurements of your shed (area) and the desired thickness for your base.

The cost of raw materials must also be estimated with the cost of labor and machinery.

A concrete pad makes a great solution for storing wet gardening equipment in your shed

A concrete shed pad provides a firm foundation for any concrete slab. It offers superior drainage and prevents the concrete from heaving or shifting with changes in ground temperature. A concrete shed pad also helps protect your property from soil erosion around the perimeter of the building, which can be an issue when you’re working outdoors, especially with all the summer rain we get in Melbourne, FL.

Concrete slabs come in various thicknesses, so you can choose the one that will best suit your needs

A concrete slab 4 inches in thickness is best for pouring. If you need to reinforce it, it’s sufficient to use rebar or wire mesh. A 3-inch to 4-inch layer of concrete will work well for the floor of a shed, workshop, or playhouse.

Do you need rebar for 4 inch slab?

A 4-inch slab of concrete poured directly on the ground does not need steel rods reinforcing it. Rebar is necessary to reinforce concrete slabs that measure 5-6 inches thick.

Does a shed add value to a house?

Typically, sheds do not add to property value.Many sheds sold today are delivered as a single piece and placed in a yard or on one side of the house. This means they can be moved with the original owner as compared to a permeant structure that is part of the home.

How do you prepare the ground for a shed?

  • To prepare the ground for a concrete pad, rake it level and remove stones.
  • Remove grass from concrete slab location by digging up sod with shovels or forklift to expose roots.
  • Backfill hole with soil, and tamp down to firm it up.

Make sure any water pipes or gas lines are far enough away from the concrete slab so they won’t be damaged during construction

It’s important to make sure any concrete slabs are in a place that is not near water pipes or gas lines. Concrete should also be at least three feet away from structures like walls and concrete fences, or else it could crack through the concrete.


A concrete slab for your shed is the foundation of any quality structure. If you are building a new or expanding an existing one in Melbourne, FL, it can be tempting to go cheap and use materials that will not stand up over time. But there are a lot of things to consider when deciding what type of concrete slab for your shed is best. For example, you’ll want to know if the climate in your area will be too cold or hot for an exposed flooring surface made out of concrete-like materials like limestone or marble.

You may also want to think about whether you plan on building a raised garden bed with soil underneath it and how much weight that would put on the structure as well.

To help make this decision easier, we have outlined some considerations above and listed their pros and cons so that you can better decide which one fits your needs best! 

Call Manatee Concrete today in Melbourne, FL for a free, no-hassle estimate at (321) 732-6123!

Uncategorized Driveways

5 Concrete Driveway Repair Benefits, and Common Questions Answered

It’s no secret that driveway repair is necessary at some point. Even if you have the most pristine driveway in town, it will eventually need to be repaired. It’s important for homeowners in Melbourne, FL know what they are getting into before repairing their driveway.

There are many benefits of driveway repair, including: increased curb appeal and property value, decreased storm water runoff and erosion from rainwater, reduced concrete deterioration because of UV exposure, or salt content in winter ice melt fluids.

There are also many types of driveway repair, including: crack sealing (repairs cracks in concrete), driveway resurfacing (applying surface material to the top layer of concrete and then topping it off with a new finish coat), repairing potholes (creating a level surface by removing any low points or high spots)

In this blog post we’ll go over these benefits and common questions homeowners in Melbourne, FL have about concrete driveway repair.

1. It increases the lifespan of your driveway

Concrete is a durable material. However, it can crack and split over time because of weathering or improper sealing practices. Concrete driveway repair will strengthen the damaged areas of your driveway with fillers such as gravel and sand that are tamped into place by hand or using machines. This can prevent driveway deterioration in the future.

2. Driveway repair is cost effective.

A damaged driveway is an expensive fix. Driveway replacement can cost anywhere from $15-40 per square foot of concrete, depending on the type and your location in North America. This means that if you have a 1000 sq ft driveway to replace with new concrete it will cost between $15,000 – 40,000 dollars!

Concrete driveway repair costs significantly less than a full driveway replacement or any other form of major repairs like asphalt overlay. The average price for installing patches onto a cracked or spalled driveway ranges around $0.60-$0.90 per square foot which amounts to approximately $700-$1250 for 100 sq ft patching job, not including sealing services.

3. It can increase the visual appeal of your driveway.

Concrete driveway repair can be used to make your driveway look brand new. Fillers are tamped into place and blended in with the concrete by hand or machine. This will give your driveway a fresh, clean appearance that will last for years as long as it is sealed regularly.

The repairs are best done when there’s no water present on the surface of the driveway because this would cause cracks in any patches made during installation.

That’s why you should wait until fall to do concrete driveway repair after the rainy summer season in Melbourne, FL has passed. If not, they could lead to cracking and possible breakage down the line.

4. It can make your driveway safer and more accessible.

A driveway is one of the most used portions of a home. It provides access to and from your driveway, parking area or garage. Repairing a driveway can prevent accidents caused by uneven surfaces or cracks in the driveway that lead to tripping hazards.

Taking care of concrete before it gets too damaged will help make sure you have a safe place for vehicles and people walking on it.

Repairing broken concrete also makes it easier on those who are physically challenged as well because they won’t be at risk for slipping on cracked sidewalks due to improper repair practices.

driveway repair
Driveway repair in Melbourne, FL

5. Concrete driveway repair can increase the value of your home.

Concrete driveway repair is a great way to improve curb appeal and make your driveway look brand new. This will help you sell your property faster and for more money than if it had been neglected.

It can also help you get a better price on your driveway if it has needed repair for months. Homeowners will be more willing to pay for driveway repairs before they buy a home if the driveway is in good condition.

Commonly asked questions about concrete driveway repair:

What types of damage warrant repair?:

If you have hairline cracks and spalls, it’s best to wait until they get worse before repairing them so that there won’t be more costly problems down the line

If you have any driveway that is sloped towards the house, it will also need to be repaired before water stands can create puddles and eventually cracks.

How long does concrete driveway repair last?:

The lifespan of driveway repairs varies depending on how often they are sealed. If done properly with adequate sealing practices, driveway repairs can last up to 15 years before needing to be repaired again.

Why is driveway repair better than replacement?:

It’s a cheaper, more cost-effective solution to driveway repairs that will improve the appearance of your driveway while still providing safety and accessibility. It also reduces risk for tripping hazards or issues with access when repairing concrete before it becomes too damaged. It is best to have driveway repair expert install a new concrete driveway or resurface your old driveway using a sealer.

Can I paint over my repaired driveway?:

Paint on top of new patches may look good at first but could eventually fade away and peel. This can happen if the driveway is not properly sealed and protected from the elements.

What are driveway sealers?:

Concrete driveway sealers are a liquid or a paste that is applied to driveway cracks and joints with the goal of sealing them. The sealer dries, creating an invisible barrier between the concrete surface and surrounding elements, such as rainwater.

– These sealers are primarily for driveway repair but can also be used on patios or other concrete surfaces in order to prevent water damage.

– They are an inexpensive driveway repair solution, especially when compared to a full driveway replacement, and will last for years if the surface is maintained regularly.

Can I repair damage caused by a driveway sealer?:

No, driveway sealers are designed to create an impervious layer that prevents seepage, which means it will be difficult for concrete driveway coating products to bond with material underneath or behind the surface of the driveway. When getting your driveway sealed, ensure the driveway will be dry for at least three days to prevent any water from entering and causing unwanted issues.

When should I repair my concrete driveway?:

If you have hairline cracks and spalls, it’s best to wait until they get worse before repairing them so that there won’t be more costly problems down the line.

It is important to start repairs as soon as possible once any damage has been done because this will prevent further issues from arising due to deterioration.

There are many benefits like increased curb appeal, less risk for tripping hazards which make concrete driveway repair worth considering if needed!

It also costs significantly less than replacing an entire driveway with new material which makes having concrete driveway repair professionally installed well worth the investment.

When repair isn’t an option

If your driveway has been severely damaged and is not a cost-effective option to repair, driveway replacement should be considered instead. If you want to look more into replacing your driveway we have another blog post that can help you decide. [post linked here]

Having a driveway that is professionally repaired will help restore your property value while providing an eye-catching curb appeal. If you need any assistance, our experts at Manatee Concrete are always on standby to perform any concrete repair jobs efficiently and effectively.


If you are looking for a trusted concrete contractor in the Melbourne, FL area, look no further. Manatee Concrete is here to provide quality workmanship with durable materials and an affordable price. We have been providing outstanding service for years so that our customers can feel confident about their investment.

As we mentioned earlier, there are many benefits of having your driveway repaired using our services such as reduced risk of cracks and water damage; but what if you’re still not convinced? That’s why it’s important to give us a call today at (321) 732-6123. We serve Melbourne, FL, Palm Bay, Rockledge, Titusville, and greater Brevard County.

You will receive a free quote with no obligation. Our staff members will take care of all aspects from start to finish.

Uncategorized Stamped

8 Popular Stamped Concrete Pattern Ideas for Your Home

Stamped concrete has become quite popular as a way to add beauty and curb appeal to your home in Melbourne, FL. There are many patterns that can be used on the driveway, sidewalk, or patio. The patterns that you choose for your home can have an enormous impact on the way it looks and feels. You want to make sure that you get something that works well with the style of your home and the landscaping around it.

There are many types of stamped concrete patterns available, but not all will work as well in your yard as others might.

In this blog post, we will discuss 8 patterns and designs including some of the most popular like herringbone, basket weave, tumbled stone, brick paver and more! We hope this guide helps you choose a pattern for your own home so you can enjoy its beauty for years to come!

How stamped concrete is made and applied

The way stamped concrete is made and applied is a fascinating process. It’s made by mixing Portland cement, sand, and water together to form a slurry. Colorants are often added such as pigments or dyes for coloration of the surface before it’s applied to the desired location on your property.

Application steps:

First, an even layer of adhesive (or mortar) is laid down onto a clean surface with some kind of trowel that has vertical ridges in order to provide better traction for the stamped concrete slab once it’s been poured into place.

This preparatory step ensures that there will be no slip hazards present when people walk across your job site during construction.

Next, stamping equipment spreads out a thin layer of liquid rubber-like material on top of the adhesive material.

When stamped, this liquid rubber-like material is forced into the texture that has been prepared in order to replicate stone or brick patterns for an attractive finish.

A stamped concrete surface will have three layers: The base layer which provides structural stability; the middle layer which gives it its coloration and decorative appeal; and finally there’s a clear coat sealant (or acrylic) applied over everything to protect from stains & water damage caused by weather conditions.

Stamped concrete is best used for concrete driveways, patios, and walkways

In Melbourne, FL, stamped concrete is commonly used for patios, driveways, and walkways because it tends to be more affordable than brick or terracotta. It also has a better look and feel, comes in many colors, is low maintenance, and can withstand extreme weather conditions like heavy snowfall. Thankfully Melbourne, FL doesn’t suffer from snow!

If it isn’t the right choice for you, stamped brick and terracotta are also great options. Stamped brick can look just like a normal bricks but has many more colors than traditional brick which allows homeowners to get creative with their projects. Terracotta stamped concrete offers an earthy feel without being too rough on the eye as stamped brick tends to be.

When it comes to the installation process, stamped concrete is a great option because stamped bricks and terracotta are both highly labor-intensive projects with long drying/curing times before the surface becomes usable, while stamped concrete can usually be installed in just one day.

The most popular stamped concrete patterns for residential homes:

1. Stone patterns

Regardless of whether or not you live in a sunny and dry climate, stone floors are beautiful. But they can also be expensive to install and maintain. Stone is prone to cracking, shifting, and more. Stamped concrete offers the same look for less money – it’s easier to match colors as well.

A most popular pattern for concrete driveways, patios, and walkways is called Ashlar. In this type of concrete work, the blocks are cut by hand to obtain a look similar to cut stone, without all the expense.

Stamped Concrete Stone Pattern
Stamped Stone Pattern

2. Brick patterns

You can create a brick paver-style surface on a driveway, patio, or walkway. Brick surfaces have been popular for decades because of how timeless and elegant they look. But laying down brick pavers is difficult and expensive; anyone who wants to emulate this look without all the hassle can turn to stamped concrete instead.

The stamped surface is created by pushing the pattern into wet concrete, and then smoothing out any rough patches with a trowel. If you want some variety in your design, stamping patterns can be layered on top of one another for an even more attractive brick look.

3. Woodgrain patterns

In recent years, wood floors have become one of the hottest flooring trends in home decorating. But it can be difficult to find the perfect, affordable wood flooring. If you’re considering installing wooden floors, you may want to consider stamped concrete. Stamped concrete mimics the color and patterns of any wood flooring options out there usually for a cheaper price.

If you’re looking for a more pet-friendly option than wood, consider using the various stamped concrete patterns that are available nowadays. Concrete is engineered to have no splintering or rotting which means that it has less chance of harming your pet.

Stamped Concrete Woodgrain
Stamped Woodgrain Pattern

4. Paver design

Pavers are a great choice for various walkway installations, patios, and driveways in Melbourne, FL. It’s simple to install and the show of your work is always uniform. However, pavers are not perfect because over time they become uneven due to shifting ground. Weeds can easily grow through them as well if there is no base beneath them.

Stamped concrete provides the appearance and stability of concrete pavers. Most stamped concrete pavers are precast, so they’re already stamped with your desired design, resulting in faster and easier installation compared to traditional bricks or stone-shaped paver stones.

If you choose to use stamped concrete for your walkway materials but not for the flooring in your home, consider using a darker color.

5. Rustic texture patterns

Rustic texture patterns for stamped concrete are popular because they resemble natural stone. These patterns are made by using a metal stamp to imitate the textured look of sandstone, slate or other rock formations. You can choose from different textures that range in depth and randomness so you have many options when it comes to customizing your stamped concrete pattern!

Rustic textures also make your surface feel more like a natural material.

It appears more authentic because stamped concrete mimics the natural look of stone. When you have stamped concrete that is textured with a rustic pattern, it feels as if your stamped concrete was cut from an old quarry!

Here are some benefits to using rustic texture patterns for stamped concrete:

  • The texture has a rough feel to it, which creates a more authentic and natural stamped concrete look.
  • This has depth and texture that makes this material feel like stone or sandstone.
  • These patterns are easy to maintain because they’re not as susceptible to stains or scratches!

6. Tile pattern

Tiles are available in many shapes, including triangular and rounded. They also come in a variety of colors: beige, white, black or cement. Unlike pavers, tiles have joints that are sealed with grout to prevent the movement due to moderate foot traffic.

One of the best features of stamped concrete is that it can be quite affordable. Tile, on the other hand typically has a higher price tag. It is also easily damaged, necessitating expensive repairs at times.

7. Basket weave patterns 

Driveways that have a stamped concrete basket weave pattern create an interesting effect when connecting in rows across the drive from one side. This type of design can break up the monotony of driveways and create that weaving design with one side connecting into it and vice versa.

Basket weave is one of the most popular patterns because it has a three-dimensional appearance. The design can be used indoors as well!

8. Checkerboard patterns 

A checkerboard pattern is popular because of the way these squares form a symmetrical pattern that looks great. Checkerboard patterns work well for driveways, where they can be stamped in a contrasting colors to give an interesting look and feel to your home or office space.

Stamped concrete is typically done with the use of textured sand or other material that’s stamped into wet cement to create an imprint. This type of construction is abrasive resistant, so it’s perfect if you need a stamped concrete driveway.

How do you maintain stamped concrete?

Always rinse your stamped concrete surface with a garden hose, but never with high pressures such as with a pressure washer, and a gentle cleaner is recommended. One key to maintenance is keeping it sealed. Otherwise, over time the surface can fade and oxidize.

If you have pets, it’s important not to let them urinate on the stamped surface since animal urine contains ammonia which will damage your stamped concrete. Dogs should also wear a collar and never be allowed off leash in areas where stamped concrete is installed.


Given the wide variety of concrete patterns, it can be hard to decide which one is right for your home. If you’re unsure about what would work best with your property and design aesthetic, contact a professional concrete contractor like Manatee Concrete in Melbourne, FL today! Call us today at (321) 732-6123 and let’s get started!

We will help you take all the information into consideration so that they are able to provide an accurate estimate on cost and time-frame. This way there won’t be any surprises along the way.